Way back when I was growing up,
televisions were hot, heavy, power-hungry beasts that took up quite a big space in the corner of the living room. These days, they're as slim as pictures and light enough to hang on the wall, and they use a fraction as much
energy. Like laptop computers,
most 21st-century televisions have flat screens with LCDs (liquid-crystal displays)—the same technology
we've been using for almost half a century in things like calculators,
cellphones, and digital watches.
What are they and how do they work? Let's take a closer look!
Photo: Small LCDs like this one have been widely used in
calculators and digital watches since the 1970s, but they were relatively expensive in those days and
produced only black-and-white (actually, dark-blueish and white) images (like the one below). During the 1980s and 1990s, manufacturers figured out how to make larger color screens at relatively affordable prices. That was when the market for LCD TVs and color laptop computers really took off.
You probably know that an old-style cathode-ray tube (CRT) television
(if you're old enough to remember such things)
makes a picture using three electron guns. Think of them as three very fast,
very precise paintbrushes that dance back and forth, painting a moving
image on the back of the screen that you can watch when you sit in
front of it.
Flatscreen LCD screens work in a completely different way.
If you sit up close to a flatscreen TV, you'll notice that the picture is made from
millions of tiny blocks called pixels
(picture elements). Each one of these is effectively a separate red,
blue, or green light that can be switched on or off very rapidly to
make the moving color picture.
In an LCD television, the pixels are switched on or off electronically using
liquid crystals to rotate polarized
light. That's not as complex as it sounds! To understand what's going on, first we need
to understand what liquid crystals are; then we need to look more closely at
light and how it travels.
Photo: This crude, old iPod Classic screen is another example of
LCD technology. Its pixels are colored black and they're either on or off, so the
display is black-and-white. In an LCD TV screen, much smaller pixels colored red, blue, or green
make a brightly colored moving picture.
What are liquid crystals?
Photo: Liquid crystals dried and viewed through polarized light. You can see they have a much
more regular structure than an ordinary liquid. Photo from research by David Weitz courtesy of
NASA Marshall Space Flight Center (NASA-MSFC).
We're used to the idea that a given substance can be in one of three states:
solid, liquid, or gas—we call them states of matter—and up until the late 19th century, scientists thought that was the end of the story. Then, in
1888, an Austrian chemist named
Friedrich Reinitzer (1857–1927) discovered liquid crystals, which are another state entirely, somewhere in between
liquids and solids. Liquid crystals might have lingered in obscurity
but for the fact that they turned out to have some very useful
properties.
Solids are frozen lumps of matter that stay put all by themselves, often with
their atoms packed in a neat, regular arrangement called a crystal
(or crystalline lattice). Liquids lack the order of solids and,
though they stay put if you keep them in a container, they flow
relatively easily when you pour them out. Now imagine a substance
with some of the order of a solid and some of the fluidity of a
liquid. What you have is a liquid crystal—a kind of halfway
house in between. At any given moment, liquid crystals can be in
one of several possible "substates" (phases) somewhere in a
limbo-land between solid and liquid. The two most important liquid
crystal phases are called nematic and smectic:
When they're in the nematic phase, liquid crystals are a bit like a liquid: their
molecules can move around and shuffle past one another, but they all
point in broadly the same direction. They're a bit like matches in a
matchbox: you can shake them and move them about but they all keep
pointing the same way.
If you cool liquid crystals, they shift over
to the smectic phase. Now the molecules form into layers that
can slide past one another relatively easily. The molecules in a
given layer can move about within it, but they can't and don't move
into the other layers (a bit like people working for different
companies on particular floors of an office block). There are actually several different smectic
"subphases," but we won't go into them in any more detail here.
Nematic liquid crystals have a really neat party trick.
They can adopt a twisted-up structure and, when you apply electricity to them, they straighten out again.
That may not sound much of a trick, but it's the key to how LCD displays turn
pixels on and off. To understand how liquid crystals can control pixels, we need to know about
polarized light.
Light is a mysterious thing. Sometimes it behaves like a stream of
particles—like a constant barrage of microscopic cannonballs carrying
energy we can see, through the air, at extremely high speed. Other
times,
light behaves more like waves on the sea. Instead of water moving up
and down, light is a wave pattern of electrical and
magnetic energy
vibrating through space.
Photo: A trick of the polarized light: rotate one pair of polarizing sunglasses past another and you can block out virtually all the light that normally passes through.
When sunlight streams down from the sky, the light waves are all
mixed up and vibrating in every possible direction. But if we put a
filter in the way, with a grid of lines arranged vertically like the
openings in prison bars (only much closer together), we can block out
all the light waves except the ones vibrating vertically (the only
light waves that can get through vertical bars). Since we block off
much of the original sunlight, our filter effectively dims the light.
This is how polarizing sunglasses work: they cut out all but the
sunlight vibrating in one direction or plane. Light filtered in this
way is called polarized or plane-polarized light (because it can travel in
only one plane).
Photo: A less well known trick of polarized light: it makes crystals gleam with amazing spectral colors due to a phenomenon called pleochroism. Photo of protein and virus crystals, many of which were grown in space. Credit: Dr. Alex McPherson, University of California, Irvine. Photo courtesy of NASA Marshall Space Flight Center (NASA-MSFC).
If you have two pairs of polarizing sunglasses (and it won't work
with ordinary sunglasses), you can do a clever
trick. If you put one pair directly in front of the other, you should
still be able to see through. But if you slowly rotate one pair, and
keep the other pair in the same place, you will see the light coming
through gradually getting darker. When the two pairs of sunglasses are
at 90 degrees to each other, you won't be able to see through them at
all. The first pair of sunglasses blocks off all the light waves except
ones vibrating vertically. The second pair of sunglasses works in exactly
the same way as the first pair. If both pairs of glasses are pointing in the same direction,
that's fine—light waves vibrating vertically can still get through
both. But if we turn the second pair of glasses through 90 degrees, the
light waves that made it through the first pair of glasses can no
longer make it through the second pair. No light at all can get through
two polarizing filters that are at 90 degrees to one another.
How LCDs use liquid crystals and polarized light
Photo: Prove to yourself that an LCD display uses polarized light. Simply put on a pair of polarizing sunglasses and rotate your head (or the display). You'll see the display at its brightest at one angle and at its darkest at exactly 90 degrees to that angle.
An LCD TV screen uses the sunglasses trick to switch its colored
pixels on or off.
At the back of the screen, there's a large bright
light that shines out toward the viewer. In front of this, there are
the millions of pixels, each one made up of smaller areas called
sub-pixels that are colored red, blue, or green. Each pixel has a
polarizing glass filter behind it and another one in front of
it at 90 degrees. That means the pixel normally looks dark. In between
the two polarizing filters there's a tiny twisted, nematic liquid crystal that
can be switched on or off (twisted or untwisted) electronically. When it's switched off, it
rotates the light passing through it through 90 degrees, effectively
allowing light to flow through the two polarizing filters and making
the pixel look bright. When it's switched on, it doesn't rotate
the light, which is blocked by one of the polarizers, and the pixel looks dark.
Each pixel is controlled by a separate transistor (a tiny electronic component) that can switch it on or off many times each second.
Photo: How liquid crystals switch light on and off. In one orientation, polarized light cannot pass through the crystals so they appear dark (left side photo). In a different orientation, polarized light passes through okay so the crystals appear bright (right side photo). We can make the crystals change orientation—and switch their pixels on and off—simply by applying an electric field. Photo from liquid crystal research by David Weitz courtesy of
NASA Marshall Space Flight Center (NASA-MSFC).
Sponsored links
How colored pixels in LCDs work
There's a bright light at the back of your TV; there are lots of
colored squares flickering on and off at the front.
What goes on in between?
Here's how each colored pixel is switched on or off:
How pixels are switched off
Light travels from the back of the TV toward the front from a large bright light.
A horizontal polarizing filter in front of the light blocks out all light waves except those vibrating horizontally.
Only light waves vibrating horizontally can get through.
A transistor switches off this pixel by switching on the electricity flowing through its liquid crystals. That makes the crystals straighten out (so they're completely untwisted), and the light travels straight through them unchanged.
Light waves emerge from the liquid crystals still vibrating horizontally.
A vertical polarizing filter in front of the liquid crystals blocks out all light waves except those vibrating vertically.
The horizontally vibrating light that travelled through the liquid crystals cannot get through the vertical filter.
No light reaches the screen at this point. In other words, this pixel is dark.
How pixels are switched on
The bright light at the back of the screen shines as before.
The horizontal polarizing filter in front of the light blocks out
all light waves except those vibrating horizontally.
Only light waves vibrating horizontally can get through.
A transistor switches on this pixel by switching off the electricity
flowing through its liquid crystals. That makes the crystals twist. The
twisted crystals rotate light waves by 90° as they travel through.
Light waves that entered the liquid crystals vibrating
horizontally emerge from them vibrating vertically.
The vertical polarizing filter in front of the liquid crystals
blocks out all light waves except those vibrating vertically.
The vertically vibrating light that emerged from the liquid crystals can
now get through the vertical filter.
The pixel is lit up. A red, blue, or green filter gives the pixel
its color.
A brief history of LCDs
1888: Friedrich Reinitzer, an Austrian plant scientist, discovers liquid crystals while studying a chemical called cholesteryl benzoate. It seems to have two distinct crystal forms, one solid and one liquid, each with its own melting point.
1889: Building on Reinitzer's work, German chemist and physicist Otto Lehmann coins the term "liquid crystals" (originally, "flowing crystals" or "fliessende Krystalle" in German) and carries out more detailed research using polarized light. Although his work is nominated for a Nobel Prize, he never actually wins one.
1962: RCA's Richard Williams begins to research the optical properties of nematic liquid crystals. He files his groundbreaking LCD patent
(US Patent 3,322,485) on November 9, 1962 and it's finally granted almost five years later on May 30, 1967.
Artwork: Richard Williams set out the principle of LCD displays in US Patent 3,322,485. A layer of liquid crystals (yellow) between two transparent plates (red) switches the display on and off when a voltage (blue) is applied. Artwork courtesy of US Patent and Trademark Office.
1960s: RCA engineers like George Heilmeier build on this theoretical research to produce the very first practical electronic displays, hoping to create LCD televisions.
1968: RCA publicly unveils LCD technology at a press conference, prompting
The New York Times to anticipate products like "A thin television screen that can be hung on the living-room wall like a painting."
1968: French scientist Pierre-Gilles de Gennes carries out groundbreaking research into phase transitions involving liquid crystals, for which he wins the Nobel Prize in Physics in 1991.
1969: RCA's Wolfgang Helfrich develops twisted nematic LCDs based on polarized light, but the company is skeptical and shies away from developing them. At Kent State University, James Fergason develops and patents an alternative version of the same idea. Today, Helfrich, his collaborator Martin Schadt, and Fergason are jointly credited with inventing the modern LCD.
1970: Having failed to commercialize the LCD, RCA sells its technology to Timex, which popularizes LCDs in some of the first digital wristwatches.
1973: Sharp unveils the world's first LCD pocket calculator (the EL-805).
1988: 100 years after the discovery of liquid crystals, Sharp sounds the death knell for cathode-ray tubes when it produces the first 14-inch color TV with a TFT (thin-film transistor) LCD display.
2010s: Optical scientists experiment with more efficient, richer-colored LCDs based on quantum dots.
Sponsored links
Don't want to read our articles? Try listening instead
Liquid Crystals by Sivaramakrishna Chandrasekhar. Cambridge University Press, 1992. A classic textbook about the three types of liquid crystals, their properties, and their various applications.
Articles
Overviews
Modifying light by Joseph Castellano,
American Scientist, Vol. 94, No. 5, September–October 2006, pp. 438–445. A great introduction to LCD technology and how it developed.
Liquid crystals by James L. Fergason,
Scientific American, Vol. 211, No. 2, August 1964, pp. 76–85. This clear, illustrated explanation (by one of the pioneers of LCDs) is well worth digging out.
News and developments
Bosch's Smart Visor Tracks the Sun While You Drive by Lawrence Ulrich. IEEE Spectrum, January 29, 2020. Old-fashioned sun visors could be obsolete thanks to an electronic version that adjusts itself automatically to the sun's strength and position.
LCDs' Bright Future by Alfred Poor. IEEE Spectrum, September 29, 2011. A look at the latest trends in LCD design.
History
How RCA Lost the LCD by Benjamin Gross. IEEE Spectrum, November 2012. Although RCA owned the original patents for LCDs, it failed to turn them into a winning commercial technology.
LCD pocket color TVs by Herbert Shuldiner, Popular Science, September 1984. This is how Popular Science announced the arrival of compact LCD screens over a quarter of a century ago. Includes quite a nice 3D diagram of how liquid crystals twist polarized light.
[PDF] Fundamentals of Liquid Crystals: How They Work and What They Do by Fujitsu. This useful backgrounder picks up from where my article leaves off, explaining the detailed workings of LCD displays, and the various different types, simply and clearly. [Archived via the Wayback Machine]
Please do NOT copy our articles onto blogs and other websites
Articles from this website are registered at the US Copyright Office. Copying or otherwise using registered works without permission, removing this or other copyright notices, and/or infringing related rights could make you liable to severe civil or criminal penalties.
